木屑颗粒机批发要选大的是为了什么?

来源:http://www.longtengkeliji.com 发布时间:2019-11-11 浏览次数:
  在客户购置木屑颗粒机批发的时分我们普通倡议选大不选小,这是由于越大型号的机器越稳定耐用。
  When the customer purchases the wood chip granulator wholesale, we generally propose to choose the big one rather than the small one, because the larger the model, the more stable and durable the machine is.
  为什么呢?我们还要从木屑颗粒机的原理说起。
  Why? We will also start with the principle of the sawdust granulator.
  木屑颗粒机的原理是压轮将木屑强力挤压经过模具的孔构成木屑颗粒,想以下假如把磨具或者压轮换成木头做的还能做颗粒么? 显而易见的不能,那么再进一步,模具压轮 是铁片做的,能行么?也是肯定不行。
  The principle of the sawdust granulator is that the pressing wheel will press the sawdust forcefully through the holes of the mold to form sawdust particles. Do you think that if you change the grinding tool or the pressing wheel into wood, you can still make particles Obviously, we can't, so further, the die pressing wheel is made of iron, can we? No way.
木屑颗粒机批发
  越大型号的木屑颗粒机磨具压轮就越大越厚,整体机型的刚度强度越大,而原料木屑的强度是不变的,所以越大的设备压制起来越“省力”,设备的稳定性也就越好,运用寿命也更长。
  The larger the size of the grinding wheel of the sawdust granulator, the thicker it is, the greater the rigidity and strength of the overall model, while the strength of the raw sawdust is constant, so the larger the equipment is pressed, the more "labor-saving", the better the stability of the equipment, and the longer the service life.
  随着设备的增大,设备自身的加工难度也跟着增大,所以一些厂很难做出合格的大型设备,于是乎只能宣传大设备不稳定,不成熟。这就不好了。
  With the increase of the equipment, the processing difficulty of the equipment itself is also increasing, so it is difficult for some factories to make qualified large equipment, so they can only publicize the instability and immaturity of large equipment. That's not good.
  当然假如产量很小,我们也不会给您引荐大型设备的,由于没有必要,作为一个正规的木屑颗粒机批发厂会脚踏实地的为客户引荐适宜的设备。本文来源:http://www.longtengkeliji.com/Of course, if the output is very small, we will not recommend large-scale equipment to you, because there is no need, as a regular sawdust granulator wholesale factory will be down-to-earth to recommend suitable equipment for customers. Source: http://www.longtengkeliji.com/

上一篇:秸秆颗粒机厂家如何让用户把钱花在刀刃上!

下一篇:生物质颗粒机生产厂家分享环模配件使用完毕如何处理