木屑颗粒机憋机的原因是什么?

来源:http://www.longtengkeliji.com 发布时间:2020-12-10 浏览次数:
木屑颗粒机在进料的过程中,由于植物下角料,企业生产废料,生活垃圾,建筑垃圾,农作物秸秆以及皮壳等的形状都是不规则的,不仅容易弄脏设备,还很容易造成设备的堵塞或憋机现象,那么造成设备憋机的原因有哪些呢?
In the feeding process of sawdust granulator, the shape of plant leftovers, enterprise production waste, domestic waste, construction waste, crop straw and husk is irregular, which not only easily pollutes the equipment, but also easily causes the equipment to block or block. So what are the reasons for the equipment holding up?
1、进料过猛,导致颗粒机挤压室内料层过厚。
1. The material layer in the extrusion chamber of the granulator is too thick due to the excessive feeding.
2、有螺丝、石块等硬物进入制粒室,造成硬物卡在压棍和磨具之间。
2. There are screws, stones and other hard objects into the granulating chamber, causing the hard objects to be stuck between the pressure bar and the grinding tool.
           木屑颗粒机批发
3、电压不稳定,降低后没有及时的调节进料速度,因为电压降低后,电机必然会通过电流的增加来补偿电压低,这样就造成电机的输出功率降低,同样的电机的扭矩力相应的降低。而没有及时的调节进料速度必然造成憋机现象的发生。
3. The voltage is unstable and the feeding speed is not adjusted in time after the voltage is reduced, because the motor will inevitably compensate for the low voltage through the increase of current after the voltage is reduced, which will cause the output power of the motor to be reduced, and the torque force of the same motor will be reduced accordingly. However, if the feeding speed is not adjusted in time, it will inevitably lead to the phenomenon of holding up the machine.
木屑颗粒机出现憋机的现象,就会导致设备无法继续正常工作,给我们的正常生产带来不便,随意我们一定要及时发现并解决憋机的问题,从而提高工作效率。
The phenomenon of holding up the machine of sawdust granulator will lead to the equipment can not continue to work normally and bring inconvenience to our normal production. We must find and solve the problem of holding machine in time at will, so as to improve the work efficiency.

上一篇:生物质燃料颗粒机拆装注意问题?

下一篇:秸秆颗粒机厂家生产出的颗粒是一种的新能源!