木屑颗粒机批发的桦木锯末压缩比你知道吗?

来源:http://www.longtengkeliji.com 发布时间:2019-06-21 浏览次数:
  木屑颗粒机压缩比的不同决定了生物质颗粒的质量,甚至影响造粒机设备的产量,以下两幅图都是用桦木原料生产的生物质颗粒燃料,为什么会出现如此大的外观差异呢?今天,龙腾的机械工程师将帮助你找到答案。
  The different compression ratio of wood chips granulator determines the quality of biomass particles and even affects the output of granulator equipment. The above two pictures are all biomass granular fuels produced from birch raw materials. Why are there such big differences in appearance? Today, Longteng mechanical engineers will help you find out the answer.
  提到生物质颗粒的生产,做这个行业的人都会知道一个同义词:木屑颗粒机压缩比。是的,以上两种颗粒是在相同的材料、相同的水分、相同的设备下,更换不同压缩比的磨具所产生的两种不同效果的生产结果。
  When it comes to the production of biomass particles, people in this industry will know a synonym: compression ratio of sawdust granulator. Yes, the above two kinds of particles are produced by replacing abrasives with different compression ratios under the same material, the same moisture content and the same equipment.
  这里不得不说木屑颗粒机,压缩比木头颗粒机磨料压缩比将根据原材料,比如我们常说:松木压缩比例是1:6,松树压缩比是1:7,硬杂木压缩比是1:5,破碎的刨花压缩比是1:5。5、玉米秸秆的压缩比为1:8,从这几个简单的数字来看,不同的原料压缩比是不同的。例如,杨木的压缩比为1:6。1和6分别代表什么?木屑颗粒机每一个磨具都是直接有一个小洞6毫米,8毫米,10毫米单位,这个1是直接代表每一个洞,如果环模的直径8毫米,1代表了八个,6代表的有效孔径,孔径等于孔的直径乘以有效孔径长度,6 * 8 = 48岁即48。8:48简化为1:6。因此,厂家只会告诉你磨具的压缩比是1:6。我们厂家只会告诉你定制磨具的压缩比是4.8出现了两个相同压缩比的版本。为了掌握磨具的实际压缩比,许多用户会自行测量磨具的压缩比,但往往忽略钟口的距离。龙腾工程师向您展示如何知道压缩比的磨削工具。
木屑颗粒机批发
  It has to be said here that the abrasive compression ratio of wood particle machine will be based on raw materials, such as: the compression ratio of pine is 1:6, the compression ratio of pine is 1:7, the compression ratio of hard miscellaneous wood is 1:5, and the compression ratio of broken particles is 1:5. 5. The compression ratio of corn straw is 1:8. From these simple figures, the compression ratio of different raw materials is different. For example, the compression ratio of poplar wood is 1:6. What do 1 and 6 represent respectively? Every abrasive tool of sawdust granulator has a small hole of 6mm, 8mm, 10mm unit. This one represents each hole directly. If the diameter of annular die is 8mm, 1 represents eight, 6 represents effective aperture, the aperture is equal to the diameter of the hole multiplied by the effective aperture length, 6*8 = 48 years old, that is 48 years old. 8:48 is simplified to 1:6. Therefore, the manufacturer will only tell you that the compression ratio of abrasives is 1:6. Our manufacturer will only tell you that the compression ratio of customized abrasives is 4.8 and there are two versions with the same compression ratio. In order to grasp the actual compression ratio of abrasives, many users will measure the compression ratio of abrasives by themselves, but often ignore the distance of the bell mouth. The crown and shell engineer shows you how to know the grinding tool of compression ratio.
  喇叭口、成型孔和释放孔构成了单元内磨削工具的厚度。因此,实际的磨料压缩比为磨料厚度减去离出料孔的距离和喇叭口到孔径的距离之比。因此流行的将造粒机的压缩比实际上是指磨料的压缩比,它是反映木屑颗粒挤压强度的一个指标。压缩比越大,颗粒越强。事实上,生物质颗粒并不是越强、越好,的颗粒密度在1.0左右,这样的颗粒在外形上成型光滑美观,燃烧时不会太硬而燃烧不足。
  Horn mouth, forming hole and release hole constitute the thickness of grinding tool in the unit. Therefore, the actual abrasive compression ratio is the ratio of the abrasive thickness minus the distance from the outlet hole and the distance from the bell mouth to the aperture. Therefore, the compression ratio of the prevailing granulator actually refers to the compression ratio of abrasives, which is an index reflecting the extrusion strength of sawdust particles. The bigger the compression ratio is, the stronger the particles are. In fact, biomass particles are not the stronger and the better. The best density of biomass particles is about 1.0. Such particles are smooth and beautiful in shape and will not burn too hard and insufficiently.
  此外,磨具的粗糙度也是衡量环模质量的一个重要指标。在相同压缩比下,粗糙度值越大,锯末颗粒的挤压阻力越大,出料难度越大。过度的粗糙度也会影响颗粒表面的质量。合适的粗糙度值应该在0.8到1.6之间。另外,工程师提醒大家,由于植被生长周期和环境气候的不同,不同地区的植被压缩比略有不同。因此,要为您自己的产品找到合适的压缩比,您需要使用您所使用的材料来证明实验。
  In addition, the roughness of the abrasive tool is also an important index to measure the quality of the ring die. Under the same compression ratio, the greater the roughness value, the greater the extrusion resistance of sawdust particles, and the greater the discharge difficulty. Excessive roughness also affects the surface quality of particles. The appropriate roughness should be between 0.8 and 1.6. In addition, the engineer reminds you that vegetation compression ratio varies slightly in different areas due to the different vegetation growth cycle and environmental climate. Therefore, in order to find a suitable compression ratio for your own products, you need to use the materials you use to prove the experiment.
  以上是木屑颗粒机批发厂家为大家整理的相关内容,希望能帮到大家,我们的网站是http://www.longtengkeliji.com,欢迎大家关注。
  The above is the relevant content of wholesale manufacturer of sawdust granulator for you, hope to help you, our website is http://www.longtengkeliji.com, welcome your attention.

上一篇:秸秆颗粒机厂家让世界没有垃圾,只有错位的资源

下一篇:生物质颗粒机生产厂家:颗粒机减速机伞齿为什么用不了几天