秸秆颗粒机厂家带您了解木屑颗粒机电流忽高忽低的原因

来源:http://www.longtengkeliji.com 发布时间:2019-07-02 浏览次数:
  在生物质木屑颗粒机的日常生产过程中,按照正常的运行和生产电流是相对稳定的,那么为什么电流会突然出现忽高忽低的现象呢?
  In the daily production process of biomass sawdust granulator, according to the normal operation and production current is relatively stable, so why does the current suddenly appear high and low?
  首先,我们来谈谈生物质木屑颗粒机电流控制的重要性:
  First of all, let's talk about the importance of current control of biomass sawdust granulator.
  每个人都知道高于木屑颗粒机的送料皮带输送机必须使用变频控制,目的是控制进给速度的速度,进给速度控制标准是基于生物质颗粒机判断安培表,电流控制是根据电动机的额定电流来控制,控制电流的目的是为了实现设备满负荷运转。只有在满负荷运转时,产量才会最大化。因此,控制锯末颗粒机的电流是生物质颗粒生产的关键。
  Everyone knows that the belt conveyor which is higher than the sawdust granulator must use frequency conversion control. The purpose is to control the feed speed. The feed speed control standard is based on the judgement ammeter of the biomass granulator. The current control is based on the rated current of the motor. The purpose of controlling the current is to realize the full load operation of the equipment. Only when it runs at full load can the output be maximized. Therefore, controlling the current of sawdust granulator is the key to the production of biomass particles.
  秸秆颗粒机厂家带您了解木屑颗粒机电流忽高忽低的原因:http://www.longtengkeliji.com
  The manufacturer of straw granulator will show you the reason why the current of sawdust granulator is high or low: http://www.longtengkeliji.com
秸秆颗粒机厂家
  (1)滚子环模间隙调整不当;如果两根压力棒与磨削工具之间的间隙大而小,就会产生压力小而压力大的压力棒,就会出现电流不稳定的现象。
  (1) improper adjustment of the clearance between the roller ring die; if the clearance between the two pressure bars and the grinding tool is large and small, the pressure bar with low pressure and high pressure will be produced, and the phenomenon of current instability will occur.
  (2)配料刀磨损严重,配料不均匀;如果物料分布不均匀,导致压杆吃料不均匀,还会引起电流忽大忽小的现象。
  (2) The batching knife is worn seriously and the batching is not uniform; if the material distribution is not uniform, it will lead to the uneven feeding of the pressure bar, and also cause the phenomenon of electric current increasing or decreasing.
  (3)生物质颗粒机进入铁石后也会出现电流忽高忽低的现象,因为当压杆旋转到铁石的位置时,设备的挤压压力引起,造成电流的突然增大。在过去,这个位置之后电流会下降。因此,当电流突然上升或不稳定下降时,必须将设备内的物料挤出,停机检查。
  (3) When the biomass granulator enters the iron ore, the current will rise or fall suddenly, because when the pressure bar rotates to the position of the iron ore, the extrusion pressure of the equipment will cause the current to increase suddenly. In the past, the current would drop after this position. Therefore, when the current suddenly rises or decreases unsteadily, the material in the equipment must be extruded and stopped for inspection.
  以上就是秸秆颗粒机厂家为您总结的木屑颗粒机电流忽高忽低的原因,想要了解更多内容,欢迎访问我们网站:http://www.longtengkeliji.com
  This is the reason why the current of the sawdust granulator is high or low. For more information, please visit our website: http://www.longtengkeliji.com.

上一篇:生物质颗粒机生产厂家质量鉴别规范这些必需看

下一篇:生物质颗粒机是如何成型的,不理想的缘由是什么?