生物质颗粒机是如何成型的,不理想的缘由是什么?

来源:http://www.longtengkeliji.com 发布时间:2019-07-03 浏览次数:
  生物质颗粒机成型不好很多用户整天用研磨工具来研究,不知道生物质颗粒机成型的影响有很多原因,工程师先带您了解一下生物质颗粒机成型是如何进行的:
  The biomass granulator is not well formed. Many users use grinding tools to study it all day. They don't know the impact of biomass granulator forming for many reasons. The engineer will first show you how the biomass granulator forming is carried out.
  根据生物质制粒机的成型机理,生物质木质素可以连接在一起的基本条件是要有合适的成型温度。一方面,提高温度可以使原料中木质素软化;另一方面,它可以使原材料本身柔软,易于压缩。在自然含水率条件下,木质素软化点温度为80 ~ 130℃。当加热到70 ~ 100℃时,木质素的粘合力开始增加,当温度达到160 ~ 250℃时,木质素可以熔化。因此,生物质成型时的加热温度不应低于软化点温度。加热温度不仅影响原料成型,而且影响生物质颗粒机的工作效率,加热温度应调整到一定范围。
  According to the forming mechanism of biomass granulator, the basic condition for biomass lignin to be joined together is the appropriate forming temperature. On the one hand, increasing the temperature can soften the lignin in the raw material; on the other hand, it can make the raw material itself soft and easy to compress. Under the condition of natural water content, the softening point temperature of lignin is 80 - 130 C. When heated to 70 - 100 C, the adhesion of lignin begins to increase, and when the temperature reaches 160 - 250 C, lignin can melt. Therefore, the heating temperature of biomass shaping should not be lower than the softening point temperature. Heating temperature not only affects the raw material forming, but also affects the working efficiency of biomass granulator. Heating temperature should be adjusted to a certain range.
生物质颗粒机生产厂家
  生物质颗粒机是如何成型的,不理想的缘由是什么?-生物质颗粒机生产厂家:http://www.longtengkeliji.com
  How is the biomass granulator formed and why is it not ideal? - Biomass granulator manufacturer: http://www.longtengkeliji.com
  温度过低,不仅原料不能成型,而且能耗增加;随着温度的升高,电机的功耗降低,但成型压力降低,成型材料压制不当,密度降低,易断裂损坏,颗粒表面过热烧焦,烟气较大。
  When the temperature is too low, not only the raw material can not be formed, but also the energy consumption increases. With the increase of temperature, the power consumption of the motor decreases, but the forming pressure decreases, the forming material is improperly pressed, the density decreases, and it is easy to break and damage. The surface of the particles is overheated and charred, and the smoke is larger.
  虽然龙腾生物质颗粒机没有外部热源加热,但在成型过程中,原料与机器部件之间的摩擦也可以将原料加热到100℃,同样可以使原料木质素软化,起到粘结剂的作用。最后的形状是冷却后形成的。
  Although Longteng biomass granulator has no external heat source to heat, the friction between raw materials and machine parts can also heat the raw materials to 100 C, which can also soften the lignin of raw materials and act as a binder. The final shape is formed after cooling.
  生物质颗粒机是如何成型的,不理想的缘由是什么?-生物质颗粒机生产厂家:http://www.longtengkeliji.com
  How is the biomass granulator formed and why is it not ideal? - Biomass granulator manufacturer: http://www.longtengkeliji.com
  当然,上述条件都是在生物质原料强度、压力辊、磨料压缩比、进料量、原料含水量等诸多因素处于理想状态下。
  Of course, the above conditions are in the ideal state for the strength of biomass raw materials, pressure rolls, abrasive compression ratio, feed volume, water content of raw materials and many other factors.
  因此,以生物质颗粒成型必须以以上几点为前提,对解决生物质颗粒机成型问题不佳的原因需要一一列举。龙腾工程师会根据现场生产情况为您找到准确的原因。想要了解更多内容,欢迎访问生物质颗粒机生产厂家网站:http://www.longtengkeliji.com
  Therefore, in order to solve the problem of biomass granulation, the precondition of biomass granulation must be the above points, and the reasons for the poor formation of biomass granulator need to be enumerated. Longteng Engineer will find out the exact reason for you according to the on-site production situation. For more information, please visit the biomass granulator manufacturer's website: http://www.longtengkeliji.com

上一篇:秸秆颗粒机厂家带您了解木屑颗粒机电流忽高忽低的原因

下一篇:木屑颗粒机的装置和操作过程您了解吗?