木屑颗粒机批发厂家告诉您颗粒机不出颗粒的缘由!

来源:http://www.longtengkeliji.com 发布时间:2019-11-06 浏览次数:
  木屑颗粒机的主传动采用高精度齿轮传动,环形模具采用快卸式抱箍式,与相对的皮带传动式相比,效率明显进步。但是有时运用木屑颗粒机时,只会产生粉末,而不会呈现颗粒缘由是什么? 以下木屑颗粒机批发小编将向您引见。
  The main drive of sawdust granulator adopts high-precision gear drive, and the ring mold adopts quick release hoop type. Compared with the relative belt drive type, the efficiency is improved obviously. But sometimes, when using the sawdust granulator, only the powder will be produced, but not the reason why the particles will not appear The following model granulator wholesale editor will introduce you.
  1.原料水分含量太低或太高
  1. The moisture content of raw materials is too low or too high
  假如水含量太高,则粉末不会太多,但是颗粒的硬度低于正常值,并且来自木屑颗粒机的颗粒容易松弛 假如原料中的水含量低,将难以构成粉末 过多 此时,应恰当控制原资料的水分含量。
木屑颗粒机批发
  If the water content is too high, the powder will not be too much, but the hardness of the particles is lower than the normal value, and the particles from the sawdust granulator are easy to relax. If the water content in the raw material is low, it will be difficult to form too much powder. At this time, the water content of the original data should be properly controlled.
  2.木屑颗粒机模具的磨损水平大
  2. The wear level of wood chip granulator mould is large
  由于木屑颗粒机模具的过度磨损,使网孔润滑,招致严重的收缩,因而,与正常值相比,颗粒的压力降低,这严重影响了颗粒的成型速度,并且招致粉末过多 这次您应该改换模具。
  Due to the excessive wear of the wood chip granulator die, the mesh lubrication and serious shrinkage are caused. Therefore, compared with the normal value, the pressure of the particles is reduced, which seriously affects the molding speed of the particles, and causes too much powder. This time you should change the die.
  3.木屑颗粒机机器老化
  3. Wood chip granulator machine aging
  木屑颗粒机的老化才能缺乏,并且电动机无法提供正常的转速,从而招致压力缺乏,无法压成颗粒 此时,应改换木屑颗粒机的电动机。
  Only when the wood chip granulator is aged can it be lacked, and the motor cannot provide normal rotation speed, which leads to a lack of pressure and can't be pressed into particles, the motor of the wood chip granulator shall be replaced.
  木屑颗粒机的工作参数直接影响物料的运动特性,进而对设备的消费效率产生重要影响 因而,设备的工作参数在消费中应合理 为了进步设备的消费效率,通常对木屑颗粒机的压辊和模具设计进行了改良,依据改良的压辊和模具,提供了更好的工作参数,使模具和物料相匹配。使设备的生产效率更高。
  The working parameters of the chip granulator directly affect the movement characteristics of the materials, and then have an important impact on the consumption efficiency of the equipment. Therefore, the working parameters of the equipment should be reasonable in the consumption. In order to improve the consumption efficiency of the equipment, the design of the pressing roller and the mold of the chip granulator is usually improved. According to the improved pressing roller and the mold, the better working parameters are provided, so that the mold and the Materials match. Make the equipment more efficient.
  以上是木屑颗粒机批发厂家为大家介绍的颗粒机不出颗粒的缘由,想要了解更多内容,欢迎访问网站:http://www.longtengkeliji.com
  The above is the reason why the granulator does not produce particles introduced by the wholesale manufacturer of sawdust granulator. For more information, please visit the website: http://www.longtengkeliji.com

上一篇:生物质颗粒机生产厂家对于空气质量下降有什么作用?

下一篇:最后一页