生物质颗粒机压轴打滑问题怎么处理?、

来源:http://www.longtengkeliji.com 发布时间:2020-07-09 浏览次数:
一旦生物质颗粒机出现压轴出现打滑的时候,不但会影响到制出来的颗粒产量,而且也会严重影响到颗粒的产量。生物质颗粒机是把生物能源压制成粒,做燃料用的。木屑颗粒机一共可以分为两种,一是离心制粒机,一是平模制粒机。其中离心颗粒机是我们的核心产品,是专门针对木屑制粒研发的产品,推荐使用。所以我们在出现在这方面问题的时候要即使采取相应的处理方式,这样才会把损失降到小,保证颗粒机的生产效率和生产质量。
Once the biomass pellet machine appears to slide, it will not only affect the production of particles, but also seriously affect the output of particles. Biomass pellet machine is used to compress bioenergy into pellets for fuel. Sawdust granulator can be divided into two types, one is centrifugal granulator, the other is flat die granulator. Centrifugal granulator is the core product of our patent, which is specially developed for sawdust granulation. It is recommended to use. Therefore, even if we adopt corresponding treatment methods, we can reduce the loss to a small extent and ensure the production efficiency and quality of the granulator.
那一般都会在什么样的情况下才会出现这样压轴打滑呢那处理方式是这么呢下面给您介绍一下生物质颗粒机压轴打滑问题及处理方式:
Under what kind of conditions will the spindle slip occur? What's the treatment method? Let's introduce the problem and treatment method of biomass pellet machine's roller slip:
一、颗粒机压轴间隙太大会影响使压轴打滑
1、 Too much clearance between the press shaft of the granulator will affect the shaft slipping
我们在使用生物质颗粒机进行作业的时候,如果没有控制好颗粒机压轴之间的间隙,很容易出现在制粒过程中制出来的颗粒不够均匀,产量偏小,并且使得颗粒机压锟不能够紧紧的压制物料,这样会很容易出现压轴打滑的现象。解决这方面好的办法能够缩小颗粒机两主轴之间的距离。
秸秆颗粒机厂家
When we use biomass granulator for operation, if we do not control the gap between the pressure shafts of the granulator, it is easy to see that the particles produced in the granulation process are not uniform enough, the output is too small, and the granulator roller can not tightly press the materials, which will easily lead to the phenomenon of the spindle slipping. A good way to solve this problem can reduce the distance between the two main shafts of the granulator.
二、颗粒原料水分过大会影响压轴打滑
2、 Too much moisture in granular raw materials will affect the shaft slipping
把原料用生物质颗粒机压制的时候,原料物料含水分过大或在通过生物质颗粒机的时候产生的蒸汽较大,会导致在生物质颗粒机制料作业的时候由于水分的润滑作用会导致颗粒机压轴出现打滑现象。解决这方面好的办法是减少原料物料蒸汽的通入量,保持物料所含的水量控制在较合理的范围内。
When the raw materials are pressed by biomass granulator, the moisture content of raw materials is too high or the steam generated when passing through the biomass granulator is large, which will lead to the sliding of the pressure shaft of the granulator due to the lubrication of water during the operation of the biomass pellet machine. A good way to solve this problem is to reduce the steam flow of raw materials and keep the water content of materials within a reasonable range.
三、颗粒机轴承安装不够灵活导致压轴打滑
3、 The installation of the bearing of the granulator is not flexible enough, resulting in the slipping of the pressure shaft
在安装生物质颗粒机压锟的轴承的时候千万不要安装的太死,否则会导致生物质颗粒机在制粒作业中出现打滑问题。解决这方好的办法是时刻关注压锟的压轴,即使更换新的压锟。
When installing the roller bearing of biomass pellet machine, do not install it too tightly, otherwise it will lead to slippage of biomass pellet machine in granulation operation. A good way to solve this problem is to always pay attention to the roller roller, even if a new roller is replaced.
四、颗粒机压轴过度使用会影响压轴打滑
4、 Excessive use of the pressure shaft of the granulator will affect the shaft slipping
生物质颗粒机使用的时间长,会导致压轴磨损(零部件失效的一种基本类型)从而出现压轴打滑的现象,不能正常的进行致力工作。解决这方面好的办法是不仅时常保持对生物质颗粒机的清洗工作,还要随时更换新的压锟。
If the biomass pellet machine is used for a long time, it will lead to the abrasion of the pressure shaft (a basic type of parts failure), which will lead to the phenomenon of the spindle slipping, and can not work normally. A good way to solve this problem is not only to keep the cleaning of biomass pellet machine, but also to replace the new roller at any time.
以上的精彩内容有秸秆颗粒机厂家http://www.longtengkeliji.com 提供技术支持,我们的网站上会继续为大家呈现很多的新鲜资讯,请记得关注我们!
The above wonderful content has straw granulator manufacturer http://www.longtengkeliji.com  Provide technical support, our website will continue to present a lot of new information for you, please remember to pay attention to us!

上一篇:生物质木屑颗粒机的发展影响着深受大家的关注

下一篇:秸秆颗粒机具备的高行程有哪些?