木屑颗粒机减速箱该怎么保养?

来源:http://www.longtengkeliji.com 发布时间:2019-06-20 浏览次数:
  木屑颗粒机减速箱该怎么保养?木屑颗粒机这个行业说起来可笑,减速机不是本人生产的,(个别厂家本人生产,但是做颗粒机的厂家做的减速机应该没有专业做减速机做的专业吧?呵呵应该)电机不是本人生产的,轴承不是本人生产的,轴承室不是本人铸造的,只是本人控制的机加工工差,那么剩余的就是装配了,这样说下来,专业做颗粒机的小厂家反而比大厂家的质量好,由于装配质量才是真正权衡木屑颗粒机质量的关键,由于,电机、减速机、轴承等等一切的品牌相同的状况下,大厂和小厂的质量差异在哪?再大的厂家技术总工不能去车间亲身组装吧?而小厂家反而亲身盯着或者亲身装配,由于他们明白我买的价钱低,目的是市场占有率,市场占有率上来了,还必需用用户的口碑去引见客户,所以质量上做的愈加用心。
  How should the speed reducer of sawdust granulator be maintained? Sawdust granulator industry is ridiculous, the reducer is not my own production. (Individual manufacturers own production, but do granulator manufacturers do reducer should not be professional reducer do it? Ha ha should) The motor is not produced by myself, the bearing is not produced by myself, the bearing chamber is not cast by myself, but the poor machineries controlled by myself, then the rest is assembled. In this way, the quality of the small manufacturer specializing in granulating machine is better than that of the big manufacturer. Because the assembly quality is the key to truly weigh the quality of the sawdust granulating machine, because, the motor, the machine, the machine, the machine, the machine, the machine, the machine, the machine, Where are the quality differences between large and small factories under the same brand conditions of reducer, bearing and so on? No matter how big a manufacturer's general technicians can't go to the workshop to assemble themselves, can they? But the small manufacturer stares at or assembles in person, because they understand that the price I buy is low, the purpose is market share, market share has come up, but also need to use the user's word of mouth to introduce customers, so the quality of doing more attentively.
  木屑颗粒机批发
  Wholesale of sawdust granulator
  关于售前方面,既然小厂家电机,减速机,轴承等一切的配置都用行业最高配置其目的是买的用户的口碑,让用户引见用户,那么就不会由于售后不及时这种软性的问题而推倒了之前的一切努力。所以售后反而愈加用心。跑偏了,言归正传说说木屑颗粒机关键部件减速机的维护颐养。
  As for the pre-sale aspect, since all the configurations of small manufacturers'motors, reducers, bearings and so on all use the highest configurations in the industry, the purpose of which is to buy the user's reputation and let the user introduce the user, then all previous efforts will not be overwhelmed by the soft problem of not timely after-sales. Therefore, after-sale is more intentional. Running out of line, the legend says that the maintenance of the key components of the sawdust granulator reducer.
  一、每一台木屑颗粒机在停止作业的时分都需求配置一台减速机,这是其机械原理所决议的。但是在长期重负荷运用过程中,木屑颗粒机减速机难免会呈现一些毛病,面对这些毛病应该如何处置,济南龙腾机械的木屑颗粒机高级工程师为您解答疑问。
  1. Each sawdust granulator needs to be equipped with a reducer when it stops working, which is determined by its mechanical principle. However, in the long-term heavy load operation process, sawdust granulator reducer inevitably presents some problems. In the face of these problems, how to deal with them, Jinan Longteng Machinery sawdust granulator senior engineer to answer your questions.
  木屑颗粒机批发
  Wholesale of sawdust granulator
  1、发现木屑颗粒机减速机油压、油温、流量不正常就需求对过滤器、油嘴停止清洗,清洗后再停止检查光滑正常前方可运用。
  1. Discovering abnormal oil pressure, oil temperature and flow of sawdust granulator reducer, it is necessary to stop cleaning filters and nozzles, and then stop checking smoothness before it can be used.
  2、木屑颗粒机减速机的轴承要采用飞溅光滑,在拆洗重装的时分需参加适量的钙钠基光滑脂,大约在轴承空间体积1/3。
  2. The bearings of sawdust granulator reducer should be spattered smooth, and proper amount of calcium-sodium base smooth grease should be taken into account when disassembling, washing and reassembling, which is about 1/3 of the bearing space volume.
  3、发现木屑颗粒机减速机通气孔梗塞,应该拆下换气体清洗过滤网后装置运用。
  3. When the blockage of ventilation holes in sawdust granulator reducer is found, the device after changing gas to clean the filter screen should be removed and used.
  4、对齿面损伤面积沿齿长方向和齿高方向均超越20%时,应成对改换齿轮,改换后应跑合和负荷试车,齿长接触达60%齿高达40%可正式运用。成对改换特意加粗,很重要,4很重要,不要换个件过几天再换一个相同件。
  4. When the damage area of the tooth surface exceeds 20% along the tooth length direction and the tooth height direction, the gear should be replaced. After the replacement, the running-in and load test should be carried out. When the tooth length contact reaches 60%, the gear can be used formally up to 40%. Improvement is very important for the change of the special thickening, 4 is very important, do not change the same piece in a few days.
  5、在木屑颗粒机工作时,发现减速机油温温升超越80℃或油池温度超越100℃及产生不正常的噪声等现象时应中止运用,检查缘由,改换光滑油扫除毛病后,方可继续运转。温度很重要,记住这两个,经常触摸齿轮箱。早发现造维护。
  5. When the sawdust granulator is working, it is found that the oil temperature rise of the reducer exceeds 80 ~C or the oil pool temperature exceeds 100 ~C, and abnormal noise occurs, the operation should be discontinued. The reason should be checked and the smooth oil can be replaced to remove the defect before the operation can continue. Temperature is very important. Keep these two in mind and touch the gearbox frequently. Early detection, construction and maintenance.
木屑颗粒机批发
  6、木屑颗粒机减速机在转动的时分输出轴不转了,有可能是减速机键衔接被毁坏,就要对减速机停止拆机检查。
  6. When the speed reducer of sawdust granulator rotates, the output shaft does not turn. It may be that the key connection of the speed reducer is destroyed, so it is necessary to stop disassembling and inspecting the speed reducer.
  木屑颗粒机批发
  Wholesale of sawdust granulator
  二、木屑颗粒机减速机维护办法
  2. Maintenance methods of sawdust granulator reducer
  1、光滑:光滑油减速机应经常检查油标油位,光滑油引荐用18~22号双曲线齿轮油,夏季用粘度大的油。第一次运转500小时后将油排空,换新油。减速机应经常检查油标油位,光滑油参加量以到达平安油位为准。
  1. Smoothness: Smooth oil reducer should check oil level regularly. Smooth oil is recommended to use hyperbolic gear oil No. 18-22 and high viscosity oil in summer. After the first operation for 500 hours, the oil will be emptied and replaced with new oil. The reducer should check the oil level regularly, and the amount of smooth oil should be based on reaching the safe oil level.
  2、齿轮减速箱的油面要经常检查,如油面低于规则位置时添加光滑油,要勤加、加,严防多加,惹起漏油。齿轮箱机械油机械运转500-1000小时应改换,其他应300小时改换。
  2. The oil surface of gear reducer should be checked frequently. If the oil surface is lower than the regular position, add smooth oil, add it frequently, and guard against excessive increase, causing oil leakage. The gear box oil machinery should be changed for 500-1000 hours, and the others should be changed for 300 hours.
  3、 经常检查吊装减速机的螺栓,不要呈现跑动,若有松动应及时巩固。
  3. Check the bolts of hoisting reducer regularly, do not show running, if loose, consolidate in time.
  4、木屑颗粒机每班工作完,要肃清设备外表粉尘。
  4. After each shift of the sawdust granulator is finished, the dust on the surface of the equipment should be removed.
  5、每半年或一年对设备停止一次检修,改换易损件。各设备检修依据运转状况而定。
  5. Stop overhauling the equipment every six months or a year to replace the fragile parts. Maintenance of each equipment depends on its operation.
  6、电气系统的显现灯,空气开关和行程开关等要经常检查,若发现损坏要及时改换。
  6. The display lights, air switches and trip switches of the electrical system should be checked frequently. If damages are found, they should be replaced in time.
  龙腾机械之所以在行业竞争中生存,靠的不是轰天盖地的宣传,而是用心做好每台设备,而是及时周到的售后效劳。我想这两点足够让龙腾机械稳步前行。欢迎关注我们的网站http://www.longtengkeliji.com,专业提供木屑颗粒机批发。欢迎来电咨询。
  The reason why Longteng Machinery survives in the industry competition lies not in the overwhelming propaganda, but in the timely and thoughtful after-sales service. I think these two points are enough for Longteng Machinery to move forward steadily. Welcome to our website http://www.longtengkeliji.com, which specializes in wholesale sawdust granulator. Welcome to inquire.

上一篇:秸秆颗粒机厂家为您剖析生物质颗粒机电流不稳定缘由

下一篇:生物质颗粒机生产厂家的压辊为什么会出现磨损?